Microsoft Windows 10/11

Click here to download for free from predig.com

RS-232 adapter or RS-485 adapters with an RS-232 to RS-485 or USB to RS-485 converter may be used for communicating with the meters.

For programming purposes, MeterView software connects to the PD765 or PD8-765 meter via the low-cost PDA8006 USB serial adapter.

Up to 100 meters simultaneously with addressing capability; minimum scan time for 100 meters: 60 sec

00 to 99

300 bps to 19,200 bps; selection must match the baud rate selected in the meters.

Dependent on system and meter settings. Rates of up to 10 meters/second are attainable at 19,200 bps.

Configure meter settings one meter at a time.

Save configuration to PDC file format or export to HTML for printing, cloning, or restoring meter.

2 seconds to 60 hours or manual

Data saved to file when Log button is pressed.

Log data to HTML file format. All enabled meters are logged to a single file.

Pop-up message indicates new alarm condition. Alarm alert notification may be disabled.

Important events are logged with date and time stamp.

Indicate relay/alarm status with customized color and message label. Relay status indication may be disabled.

Show engineering units and tag number information; these settings are not saved to the meter.

Relays may be acknowledged by clicking on corresponding Relay Status button. Meters must be set up for manual reset and Relay Mode must be enabled in MeterView.

3