Precision Digital Logo

PDA9000SH ConsoliDator+ Stainless Steel Sun Hood

PDA9000SH Instruction Manual
PD9000 and Enclosure Sold Separately
PD9000 and Enclosure Sold Separately
Attached Gasket on Back of PDA9000SH

Features

  • Provides Shade for PD9000 ConsoliDator+ Multivarialble Controller
  • Made from 18 Gauge 316 Stainless Steel
  • Easy Mounting Requires no Drilled Holes in the Enclosure Cover/Door
  • Includes Gasket to Maintain NEMA 4X Seal

Overview

The PDA9000SH Stainless Steel Sun Hood improves the readability of the PD9000 ConsoliDator+ Multivarialble Controller when it is mounted in direct sunlight by shading the instrument from the sun.

The Sun Hood is made from 18 gauge 316 stainless steel and mounts between the PD9000 controller and the enclosure cover/door.

In addition, the attached gasket is installed between the Sun Hood and the enclosure cover/door to provide a NEMA 4X seal. The whole assembly is held in place by the 12 mounting screws provided with the ConsoliDator+ Controller.

Material18 gauge 316 stainless steel
Overall Dimensions11.04" x 11.08" x 6.15"
(280 mm x 281 mm x 155 mm)
(W x H x D)
Weight3.4 lb (1.5 kg)
Gasket MaterialSilicone Foam

Dimensions

Units: Inches (mm)

PDA9000SH Dimensions

PDA9000SH Overall Dimensions

PDA9000SH Cutout

PDA9000SH ConsoliDator+ Cutout

Mounting Instructions

  1. Slide the back side of the ConsoliDator+ through the cutout on the front side of the Sun Hood and through the enclosure cover/door cutout.
  2. Attach the back mounting bracket to the PD9000 ConsoliDator+ behind the enclosure cover/door with the 12 screws provided with the ConsoliDator+ and tighten to secure.
PDA9000SH Mounting

Note: If installing in a thick panel, the added thickness of the Sun Hood may require that the mounting retention latches be loosened to allow room to clip into the panel cutout.

loader.gif

Choose Your Options

Configurations other than those specified above are available at a $250 adder. Consult factory for desired model number and price.