Field Mounted Indicators Batch Controller ATEX (IS)

PD4-6620 Loop Leader+ Large Display Loop-Powered Flow Rate/Totalizer
The Loop Leader+ loop-powered large display flow rate/totalizers can be installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal. One of the most convenient features of these instruments is their large, dual-line display which is typically used to display flow rate on the 2.8" 5-character alphanumeric top display and flow total, flow grand total, or a tag on the 1.5" 8-character alphanumeric bottom display. Both display lines use 14-segment, alphanumeric characters that provide much clearer indication of tags, units, or alarm messages than 7-segment characters do.
Further enhancing the display on these instruments is a 20-segment bargraph that also includes a numeric value of the percentage the bargraph represents. Free, PC-based, MeterView XL software that connects to the meter via a micro USB cable is available for programming and setup of the meters.
The PD4 is available in two configurations: Display only and with two solid-state relays and 4-20 mA analog output. All models come equipped with two open collector outputs and remote contacts. The open collector outputs are useful for alarm indication or pulse output. The remote contacts can be used to remotely operate the four programming buttons, to reset the total, to start/stop a timer/stopwatch, and more. The relays can be programmed for alarm indication, sample, timer, batch control, or stopwatch.
Finally, the PD4-6628 is an intrinsically safe version that can be installed in hazardous areas.
Why you should buy:
2.8" Dual-Line Backlit LCD Display
Loop-Powered
Display Rate & Total Simultaneously
Flashing Red Display / Message on Alarm
Free Programming Software
Discrete and Analog Output Options
PD4-6620 Loop Leader+ Large Display Loop-Powered Intrinsically Safe Flow Rate/Totalizer
The Loop Leader+ loop-powered large display flow rate/totalizers can be installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal. One of the most convenient features of these instruments is their large, dual-line display which is typically used to display flow rate on the 2.8" 5-character alphanumeric top display and flow total, flow grand total, or a tag on the 1.5" 8-character alphanumeric bottom display. Both display lines use 14-segment, alphanumeric characters that provide much clearer indication of tags, units, or alarm messages than 7-segment characters do.
Further enhancing the display on these instruments is a 20-segment bargraph that also includes a numeric value of the percentage the bargraph represents. Free, PC-based, MeterView XL software that connects to the meter via a micro USB cable is available for programming and setup of the meters.
The PD4 is available in two configurations: Display only and with two solid-state relays and 4-20 mA analog output. All models come equipped with two open collector outputs and remote contacts. The open collector outputs are useful for alarm indication or pulse output. The remote contacts can be used to remotely operate the four programming buttons, to reset the total, to start/stop a timer/stopwatch, and more. The relays can be programmed for alarm indication, sample, timer, batch control, or stopwatch.
Finally, the PD4-6628 is an intrinsically safe version that can be installed in hazardous areas.
Why you should buy:
2.8" Dual-Line Backlit LCD Display
Loop-Powered
Display Rate & Total Simultaneously
Intrinsically Safe
Flashing Red Display / Message on Alarm
Free Programming Software
Discrete and Analog Output Options
PD6938-IS ProtEX+ Pulse Input Intrinsically Safe Flow Rate/Totalizer
The PD6938 ProtEX+ pulse input flow rate/totalizers can be installed in a variety of areas (hazardous, dirty, wet, corrosive, hot, or cold) to provide convenient and informative display of flow rate and total from any pulse output flowmeter. These instruments will accept a variety of pulse inputs, including slow pulse rates. They can be powered from a battery, 9-30 VDC, or the 4-20 mA output loop, have on-board datalogging capabilities, come with approvals for intrinsic safety, and can be ordered with optional 4-20 mA output and two relays.
The PD6938-IS is ATEX and IECEx Certified as Intrinsically Safe.
It can operate down to -40°C and is certified by the agencies to be installed in areas that get as cold as -55°C. The display will cease functioning below -40°C but no damage will be done to the instrument.
The PD6938 ProtEX+ is available in aluminum and stainless steel enclosures that are designed for easy use and installation. The process connection is available in M20, 3/4" NPT and 1" NPT and there are two other conduit holes for field wiring.
Free, PC-based, MeterView XL software that connects to the meter via a micro-USB cable is available for programming and setup of the instruments. Four CapTouch through-window buttons are available to operate the instrument without removing the cover.
All models come equipped with two open collector outputs and a digital input. There are also models available with Modbus RTU RS-485 communications, two solid-state relays, and isolated 4-20 mA analog output options.
Why you should buy:
Dual-Line Backlit LCD Display
Operate to -40°C; Install to -55°C
Pulse Input Rate / Totalizer
Display Rate & Total Simultaneously
Intrinsically Safe
Aluminum & Stainless Steel Enclosures
Flashing Red Display / Message on Alarm
CapTouch Through-Window Programming
Free Programming Software
Discrete and Analog Output Options

Search form

Search form

Field Mounted Indicators Batch Controller ATEX (IS)

Field Mounted Indicators Batch Controller ATEX (IS)