Precision Digital Logo

Pump Control Sunlight Readable

Pump Control
Control your pumps and monitor tank levels with Precision Digital's large, bright, easy-to-read pump controllers. Our pump controllers include many features such as lead-lag multi-pump alternation control (for up to 8 pumps) to help prolong the life of your pumps, advanced linearization and automatic round-horizontal-tank volume calculation for oddly shaped tanks, and integrated feet & inches level displays with clearly labeled units for familiar and easy-to-read measurement. Pump controllers are available in NEMA 4X front digital panel meters as well as UL, CSA, ATEX, and IECEx approved explosion-proof meters for hazardous areas. Click here to read more about lead-lag pump alternation.

Pump Control Sunlight Readable

  • PD8-6001 ProtEX-MAX Explosion-Proof Feet & Inches Level Meter

    The ProtEX-MAX PD8-6001 explosion-proof level indicator offers all the functionality of the ProVu PD6001 as a CSA, ATEX, and IECEx certified explosion-proof product. It is available in an aluminum or stainless steel enclosure and will operate over a wide temperature range of -55 to 65°C (-67 to 149°F). It is specifically designed to display level in feet & inches, instead of the usual decimal format. The meter accepts a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal and displays that signal on a dual-line display with convenient feet and inches designations on the upper line. The upper display can even read fractions of an inch in 8ths or 16ths. The lower line can be used to indicate a tag or to display the input in another scale, such as volume in gallons or liters. The PD8-6001 includes a 24 VDC power supply to drive the transmitter and can be equipped with four internal relays and a 4-20 mA output. It can be programmed and operated without opening the housing by using the built-in CapTouch through-glass buttons or the RS-485 serial communication port with free Modbus protocol.

    Why you should buy:
  • PD2-6080 Helios Modbus Scanner with Dual Analog Inputs

    Go with the Helios PD2-6080 when you have multiple, (up to 16), Modbus registers you want to display on a single large display meter. The PD2-6080 can also accept two 4-20 mA signals. The PD2-6080 can be programmed as a Modbus RTU Master, Slave or Snooper allowing it to work in just about any Modbus application. Typically, the upper line displays the PV and the lower line displays the tag.

     

     

     

     

    Why you should buy:
  • PD2-6081 Helios Feet & Inches Modbus Scanner with Dual Analog Inputs

    Go with the Helios PD2-6081 when you have a level application involving Modbus signals and you prefer to display in feet and inches instead of the more common decimal format. The PD2-6081 can display up to 16 modbus registers so a typical application might be 16 tank levels, 8 tank levels and 8 interface levels, or 5 tank levels, 5 interface levels and 5 temperatures. The PD2-6081 makes a great outdoor tank side indicator because its display is bright enough to read in direct sunlight and it will operate from -40 to 150°F.

     

     

     

    Why you should buy: