Precision Digital Logo

Meter Selection Utility


Answer nine simple questions about your application to find the exact meter you need.
Don't know the answer to some of the questions? Just fill out what you know!

Loop-Power

Displaying 13 total products (page 2 of 2):

  • PD662 Survivor NEMA 4X Loop-Powered Process Meter

    The PD662 NEMA 4X, CSA Certified loop-powered meter is perfect
    for applications where a simple, inexpensive display is required
    and AC power is not available. The PD662 derives all its power
    from the 4-20 mA loop, including its optional backlight feature. It
    can be easily scaled in the field using four push buttons; with or
    without applying an actual calibration signal. The PD662’s display
    will read up to 2999; we call this 3½+ digits! The PD662 is housed
    in a rugged NEMA 4X enclosure and is provided with one ½" NPT
    pipe conduit hole.


    Why you should buy:
  • PD6620 Loop Leader Loop-Powered Rate/Totalizer

    The Loop Leader PD6620 is a loop-powered, 1/8 DIN flow rate/totalizer designed for demanding process control applications. A dual-line display featuring five digits on the top line and eight digits on the bottom line, preprogrammed engineering units, loop-powered backlight with a unique red backlight option for alarm conditions, and optional bargraph display (PD6624) provide a clear and attractive presentation of the process. All models come equipped with two open collector outputs and are available with two solid state relays and a 4-20 mA analog output. These outputs can be programmed for alarm indication, signal retransmission via pulse or analog signal, pump control, and a number of other useful features. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The Loop Leader loop-powered rate/totalizer is built in a shallow-depth case with a IP65 front and features loop-powered backlighting and a wide -40 to 167°F (-40 to 75°C) operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.



    PD6622
    Why you should buy:
  • PD6620 Loop Leader Loop-Powered Intrinsically Safe & Nonincendive Rate/Totalizer

    The Loop Leader PD6620 is an ATEX and IECEx approved, UL listed, intrinsically safe and nonincendive, loop-powered, 1/8 DIN flow rate/totalizer designed for demanding process control applications. A dual-line display featuring five digits on the top line and eight digits on the bottom line, preprogrammed engineering units, loop-powered backlight with a unique red backlight option for alarm conditions, and optional bargraph display (PD6628) provide a clear and attractive presentation of the process. All models come equipped with two open collector outputs and are available with two solid state relays and a 4-20 mA analog output. These outputs can be programmed for alarm indication, signal retransmission via pulse or analog signal, pump control, and a number of other useful features. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The Loop Leader loop-powered rate/totalizer is built in a shallow-depth case with a IP65 front and features loop-powered backlighting and a wide -40 to 158°F (-40 to 70°C) operating temperature range. It doesn't matter if it's in hazardous areas, indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

    PD6626
    Why you should buy: